Start by unwrapping both filters, locking the shell, and connecting power. Your PECOAir or PECOAir+ is then ready to clean the air. The Molekule app adds remote controls and a closer look at what's in your room's air.
Prefer to follow along? These videos show the physical steps.
Helpful Tip: Unwrap both filters before connecting power. The plastic protects them during shipping and needs to come off before use.
Step-by-Step Instructions
- Place your purifier upright on a stable, level floor. Keep it unplugged.
- Lift the top tray out of the box to find the power cord underneath.
- Hold the base steady. Turn the outer shell counterclockwise, then lift it straight up.
- Remove both filters. Take all plastic wrapping off each filter.
- Place both filters back into their openings with the pull ribbons facing outward and accessible.
- Lower the shell over the purifier. Align it with the base and turn it clockwise until it locks.
- Carefully tilt the unplugged purifier to reach the power connection underneath. Connect the supplied power cable and fit it into the cable guides.
- Return the purifier upright. Place it at least 2 feet from walls, with all air openings clear.
- Plug the supplied power supply into a working wall outlet. Tap the control on top to wake the purifier.
- Download the Molekule app, sign in or create an account, and follow the setup prompts for your model to connect it.
Care & Support Guidelines
Use genuine PECO-HEPA Advanced filters made for PECOAir and PECOAir+. Need a hand with setup? Visit help.molekule.com and tell us where you stopped. For warranty coverage and exclusions, see the limited warranty information at molekule.com.