Fan Speeds / Manual Mode
Your device’s five fan speeds correspond to the number of dotted white lights. Tapping the button cycles through speeds.
The PECO-Filter status indicator helps you track the replacement schedule for your PECO-Filter.
Each time you plug in your device or lock its shell into place, it checks the authenticity of the PECO-Filter. A pulsing white light indicates it's in progress. A green light indicates it's confirmed as a certified Molekule PECO-Filter and will run normally. A red light indicates the PECO-Filter has not been verified and the device will not start.
** Please note the first batch of Molekule Air Mini devices will not pulse a white light and display a green light upon closing the lid and/or upon start up. Rest assured, if your Air Mini powers on and the red filter icon is not displayed then your Air Mini is operating normally and the filter has been authenticated.
If the PECO-Filter Status Indicator is off, there’s no need to replace your PECO-Filter.
An orange light indicates your PECO-Filter is nearing the recommended replacement time.
A red light indicates your PECO-Filter has reached recommended replacement time. Replace the existing PECO-Filter.
Flashing red & white
Flashing red-and-white lights indicate your PECO-Filter should be replaced immediately because it has exceeded its recommended replacement time. The device will go on standby, the PECO-Filter status indicator will flash red, and the fan speed lights will pulse white as a reminder to replace. You can restart your device by tapping the center button on top of your device. Your device will repeatedly go on standby after extended use until the PECO-Filter is replaced.
Upon powering the device (after setup), this indicator will pulse white while it searches for a connection.
If it turns green, it has connected successfully.
A red WiFi Status Indicator means an issue with your WiFi is prohibiting your Molekule Air Mini+ from connecting.
If this indicator is off, there are no issues with your WiFi.
If it stops pulsing and turns solid white, it’s paired to your phone, but hasn’t been connected to WiFi.
Additional Features for Air Mini+
Your Molekule Air Mini+ has a sensor to measure airborne particulate matter levels. Auto Protect uses these levels to regulate fan speed for optimal air purification.
Activate Auto Protect Mode by tapping the button on the device to cycle through the fan speeds or use the mobile app.